GM6000 Digital Heater Controller
Branch: main
SDX-1330
Main Page
Namespaces
Components
Files
File List
File Members
Bsp
ST
NUCLEO-F767ZI
alpha1
MX
Core
Inc
stm32f7xx_hal_conf.h
1
/* USER CODE BEGIN Header */
2
/**
3
******************************************************************************
4
* @file stm32f7xx_hal_conf_template.h
5
* @author MCD Application Team
6
* @brief HAL configuration template file.
7
* This file should be copied to the application folder and renamed
8
* to stm32f7xx_hal_conf.h.
9
******************************************************************************
10
* @attention
11
*
12
* Copyright (c) 2017 STMicroelectronics.
13
* All rights reserved.
14
*
15
* This software is licensed under terms that can be found in the LICENSE file
16
* in the root directory of this software component.
17
* If no LICENSE file comes with this software, it is provided AS-IS.
18
*
19
******************************************************************************
20
*/
21
/* USER CODE END Header */
22
23
/* Define to prevent recursive inclusion -------------------------------------*/
24
#ifndef __STM32F7xx_HAL_CONF_H
25
#define __STM32F7xx_HAL_CONF_H
26
27
#ifdef __cplusplus
28
extern
"C"
{
29
#endif
30
31
/* Exported types ------------------------------------------------------------*/
32
/* Exported constants --------------------------------------------------------*/
33
34
/* ########################## Module Selection ############################## */
35
/**
36
* @brief This is the list of modules to be used in the HAL driver
37
*/
38
#define HAL_MODULE_ENABLED
39
40
/* #define HAL_CRYP_MODULE_ENABLED */
41
/* #define HAL_ADC_MODULE_ENABLED */
42
/* #define HAL_CAN_MODULE_ENABLED */
43
/* #define HAL_CEC_MODULE_ENABLED */
44
/* #define HAL_CRC_MODULE_ENABLED */
45
/* #define HAL_DAC_MODULE_ENABLED */
46
/* #define HAL_DCMI_MODULE_ENABLED */
47
/* #define HAL_DMA2D_MODULE_ENABLED */
48
/* #define HAL_ETH_MODULE_ENABLED */
49
/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
50
/* #define HAL_NAND_MODULE_ENABLED */
51
/* #define HAL_NOR_MODULE_ENABLED */
52
/* #define HAL_SRAM_MODULE_ENABLED */
53
/* #define HAL_SDRAM_MODULE_ENABLED */
54
/* #define HAL_HASH_MODULE_ENABLED */
55
/* #define HAL_I2S_MODULE_ENABLED */
56
/* #define HAL_IWDG_MODULE_ENABLED */
57
/* #define HAL_LPTIM_MODULE_ENABLED */
58
/* #define HAL_LTDC_MODULE_ENABLED */
59
/* #define HAL_QSPI_MODULE_ENABLED */
60
/* #define HAL_RNG_MODULE_ENABLED */
61
/* #define HAL_RTC_MODULE_ENABLED */
62
/* #define HAL_SAI_MODULE_ENABLED */
63
/* #define HAL_SD_MODULE_ENABLED */
64
/* #define HAL_MMC_MODULE_ENABLED */
65
/* #define HAL_SPDIFRX_MODULE_ENABLED */
66
/* #define HAL_SPI_MODULE_ENABLED */
67
/* #define HAL_TIM_MODULE_ENABLED */
68
#define HAL_UART_MODULE_ENABLED
69
/* #define HAL_USART_MODULE_ENABLED */
70
/* #define HAL_IRDA_MODULE_ENABLED */
71
/* #define HAL_SMARTCARD_MODULE_ENABLED */
72
/* #define HAL_WWDG_MODULE_ENABLED */
73
/* #define HAL_PCD_MODULE_ENABLED */
74
/* #define HAL_HCD_MODULE_ENABLED */
75
/* #define HAL_DFSDM_MODULE_ENABLED */
76
/* #define HAL_DSI_MODULE_ENABLED */
77
/* #define HAL_JPEG_MODULE_ENABLED */
78
/* #define HAL_MDIOS_MODULE_ENABLED */
79
/* #define HAL_SMBUS_MODULE_ENABLED */
80
/* #define HAL_EXTI_MODULE_ENABLED */
81
#define HAL_GPIO_MODULE_ENABLED
82
#define HAL_EXTI_MODULE_ENABLED
83
#define HAL_DMA_MODULE_ENABLED
84
#define HAL_RCC_MODULE_ENABLED
85
#define HAL_FLASH_MODULE_ENABLED
86
#define HAL_PWR_MODULE_ENABLED
87
#define HAL_I2C_MODULE_ENABLED
88
#define HAL_CORTEX_MODULE_ENABLED
89
90
/* ########################## HSE/HSI Values adaptation ##################### */
91
/**
92
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
93
* This value is used by the RCC HAL module to compute the system frequency
94
* (when HSE is used as system clock source, directly or through the PLL).
95
*/
96
#if !defined (HSE_VALUE)
97
#define HSE_VALUE ((uint32_t)8000000U)
/*!< Value of the External oscillator in Hz */
98
#endif
/* HSE_VALUE */
99
100
#if !defined (HSE_STARTUP_TIMEOUT)
101
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U)
/*!< Time out for HSE start up, in ms */
102
#endif
/* HSE_STARTUP_TIMEOUT */
103
104
/**
105
* @brief Internal High Speed oscillator (HSI) value.
106
* This value is used by the RCC HAL module to compute the system frequency
107
* (when HSI is used as system clock source, directly or through the PLL).
108
*/
109
#if !defined (HSI_VALUE)
110
#define HSI_VALUE ((uint32_t)16000000U)
/*!< Value of the Internal oscillator in Hz*/
111
#endif
/* HSI_VALUE */
112
113
/**
114
* @brief Internal Low Speed oscillator (LSI) value.
115
*/
116
#if !defined (LSI_VALUE)
117
#define LSI_VALUE ((uint32_t)32000U)
/*!< LSI Typical Value in Hz*/
118
#endif
/* LSI_VALUE */
/*!< Value of the Internal Low Speed oscillator in Hz
119
The real value may vary depending on the variations
120
in voltage and temperature. */
121
/**
122
* @brief External Low Speed oscillator (LSE) value.
123
*/
124
#if !defined (LSE_VALUE)
125
#define LSE_VALUE ((uint32_t)32768U)
/*!< Value of the External Low Speed oscillator in Hz */
126
#endif
/* LSE_VALUE */
127
128
#if !defined (LSE_STARTUP_TIMEOUT)
129
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U)
/*!< Time out for LSE start up, in ms */
130
#endif
/* LSE_STARTUP_TIMEOUT */
131
132
/**
133
* @brief External clock source for I2S peripheral
134
* This value is used by the I2S HAL module to compute the I2S clock source
135
* frequency, this source is inserted directly through I2S_CKIN pad.
136
*/
137
#if !defined (EXTERNAL_CLOCK_VALUE)
138
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U)
/*!< Value of the Internal oscillator in Hz*/
139
#endif
/* EXTERNAL_CLOCK_VALUE */
140
141
/* Tip: To avoid modifying this file each time you need to use different HSE,
142
=== you can define the HSE value in your toolchain compiler preprocessor. */
143
144
/* ########################### System Configuration ######################### */
145
/**
146
* @brief This is the HAL system configuration section
147
*/
148
#define VDD_VALUE 3300U
/*!< Value of VDD in mv */
149
#define TICK_INT_PRIORITY ((uint32_t)15U)
/*!< tick interrupt priority */
150
#define USE_RTOS 0U
151
#define PREFETCH_ENABLE 0U
152
#define ART_ACCELERATOR_ENABLE 0U
/* To enable instruction cache and prefetch */
153
154
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U
/* ADC register callback disabled */
155
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U
/* CAN register callback disabled */
156
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U
/* CEC register callback disabled */
157
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U
/* CRYP register callback disabled */
158
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U
/* DAC register callback disabled */
159
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U
/* DCMI register callback disabled */
160
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U
/* DFSDM register callback disabled */
161
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U
/* DMA2D register callback disabled */
162
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U
/* DSI register callback disabled */
163
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U
/* ETH register callback disabled */
164
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U
/* HASH register callback disabled */
165
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U
/* HCD register callback disabled */
166
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U
/* I2C register callback disabled */
167
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U
/* I2S register callback disabled */
168
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U
/* IRDA register callback disabled */
169
#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U
/* JPEG register callback disabled */
170
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U
/* LPTIM register callback disabled */
171
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U
/* LTDC register callback disabled */
172
#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U
/* MDIOS register callback disabled */
173
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U
/* MMC register callback disabled */
174
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U
/* NAND register callback disabled */
175
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U
/* NOR register callback disabled */
176
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U
/* PCD register callback disabled */
177
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U
/* QSPI register callback disabled */
178
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U
/* RNG register callback disabled */
179
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U
/* RTC register callback disabled */
180
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U
/* SAI register callback disabled */
181
#define USE_HAL_SD_REGISTER_CALLBACKS 0U
/* SD register callback disabled */
182
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U
/* SMARTCARD register callback disabled */
183
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U
/* SDRAM register callback disabled */
184
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U
/* SRAM register callback disabled */
185
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U
/* SPDIFRX register callback disabled */
186
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U
/* SMBUS register callback disabled */
187
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U
/* SPI register callback disabled */
188
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U
/* TIM register callback disabled */
189
#define USE_HAL_UART_REGISTER_CALLBACKS 1U
/* UART register callback enabled */
190
#define USE_HAL_USART_REGISTER_CALLBACKS 0U
/* USART register callback disabled */
191
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U
/* WWDG register callback disabled */
192
193
/* ########################## Assert Selection ############################## */
194
/**
195
* @brief Uncomment the line below to expanse the "assert_param" macro in the
196
* HAL drivers code
197
*/
198
/* #define USE_FULL_ASSERT 1U */
199
200
/* ################## Ethernet peripheral configuration ##################### */
201
202
/* Section 1 : Ethernet peripheral configuration */
203
204
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
205
#define MAC_ADDR0 2U
206
#define MAC_ADDR1 0U
207
#define MAC_ADDR2 0U
208
#define MAC_ADDR3 0U
209
#define MAC_ADDR4 0U
210
#define MAC_ADDR5 0U
211
212
/* Definition of the Ethernet driver buffers size and count */
213
#define ETH_RX_BUF_SIZE
/* buffer size for receive */
214
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
/* buffer size for transmit */
215
#define ETH_RXBUFNB ((uint32_t)4U)
/* 4 Rx buffers of size ETH_RX_BUF_SIZE */
216
#define ETH_TXBUFNB ((uint32_t)4U)
/* 4 Tx buffers of size ETH_TX_BUF_SIZE */
217
218
/* Section 2: PHY configuration section */
219
220
/* DP83848_PHY_ADDRESS Address*/
221
#define DP83848_PHY_ADDRESS 0x01U
222
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
223
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
224
/* PHY Configuration delay */
225
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
226
227
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
228
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
229
230
/* Section 3: Common PHY Registers */
231
232
#define PHY_BCR ((uint16_t)0x0000U)
/*!< Transceiver Basic Control Register */
233
#define PHY_BSR ((uint16_t)0x0001U)
/*!< Transceiver Basic Status Register */
234
235
#define PHY_RESET ((uint16_t)0x8000U)
/*!< PHY Reset */
236
#define PHY_LOOPBACK ((uint16_t)0x4000U)
/*!< Select loop-back mode */
237
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U)
/*!< Set the full-duplex mode at 100 Mb/s */
238
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U)
/*!< Set the half-duplex mode at 100 Mb/s */
239
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U)
/*!< Set the full-duplex mode at 10 Mb/s */
240
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U)
/*!< Set the half-duplex mode at 10 Mb/s */
241
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U)
/*!< Enable auto-negotiation function */
242
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U)
/*!< Restart auto-negotiation function */
243
#define PHY_POWERDOWN ((uint16_t)0x0800U)
/*!< Select the power down mode */
244
#define PHY_ISOLATE ((uint16_t)0x0400U)
/*!< Isolate PHY from MII */
245
246
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U)
/*!< Auto-Negotiation process completed */
247
#define PHY_LINKED_STATUS ((uint16_t)0x0004U)
/*!< Valid link established */
248
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U)
/*!< Jabber condition detected */
249
250
/* Section 4: Extended PHY Registers */
251
#define PHY_SR ((uint16_t)0x10U)
/*!< PHY status register Offset */
252
253
#define PHY_SPEED_STATUS ((uint16_t)0x0002U)
/*!< PHY Speed mask */
254
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U)
/*!< PHY Duplex mask */
255
256
/* ################## SPI peripheral configuration ########################## */
257
258
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
259
* Activated: CRC code is present inside driver
260
* Deactivated: CRC code cleaned from driver
261
*/
262
263
#define USE_SPI_CRC 0U
264
265
/* Includes ------------------------------------------------------------------*/
266
/**
267
* @brief Include module's header file
268
*/
269
270
#ifdef HAL_RCC_MODULE_ENABLED
271
#include "stm32f7xx_hal_rcc.h"
272
#endif
/* HAL_RCC_MODULE_ENABLED */
273
274
#ifdef HAL_EXTI_MODULE_ENABLED
275
#include "stm32f7xx_hal_exti.h"
276
#endif
/* HAL_EXTI_MODULE_ENABLED */
277
278
#ifdef HAL_GPIO_MODULE_ENABLED
279
#include "stm32f7xx_hal_gpio.h"
280
#endif
/* HAL_GPIO_MODULE_ENABLED */
281
282
#ifdef HAL_DMA_MODULE_ENABLED
283
#include "stm32f7xx_hal_dma.h"
284
#endif
/* HAL_DMA_MODULE_ENABLED */
285
286
#ifdef HAL_CORTEX_MODULE_ENABLED
287
#include "stm32f7xx_hal_cortex.h"
288
#endif
/* HAL_CORTEX_MODULE_ENABLED */
289
290
#ifdef HAL_ADC_MODULE_ENABLED
291
#include "stm32f7xx_hal_adc.h"
292
#endif
/* HAL_ADC_MODULE_ENABLED */
293
294
#ifdef HAL_CAN_MODULE_ENABLED
295
#include "stm32f7xx_hal_can.h"
296
#endif
/* HAL_CAN_MODULE_ENABLED */
297
298
#ifdef HAL_CEC_MODULE_ENABLED
299
#include "stm32f7xx_hal_cec.h"
300
#endif
/* HAL_CEC_MODULE_ENABLED */
301
302
#ifdef HAL_CRC_MODULE_ENABLED
303
#include "stm32f7xx_hal_crc.h"
304
#endif
/* HAL_CRC_MODULE_ENABLED */
305
306
#ifdef HAL_CRYP_MODULE_ENABLED
307
#include "stm32f7xx_hal_cryp.h"
308
#endif
/* HAL_CRYP_MODULE_ENABLED */
309
310
#ifdef HAL_DMA2D_MODULE_ENABLED
311
#include "stm32f7xx_hal_dma2d.h"
312
#endif
/* HAL_DMA2D_MODULE_ENABLED */
313
314
#ifdef HAL_DAC_MODULE_ENABLED
315
#include "stm32f7xx_hal_dac.h"
316
#endif
/* HAL_DAC_MODULE_ENABLED */
317
318
#ifdef HAL_DCMI_MODULE_ENABLED
319
#include "stm32f7xx_hal_dcmi.h"
320
#endif
/* HAL_DCMI_MODULE_ENABLED */
321
322
#ifdef HAL_ETH_MODULE_ENABLED
323
#include "stm32f7xx_hal_eth.h"
324
#endif
/* HAL_ETH_MODULE_ENABLED */
325
326
#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
327
#include "stm32f7xx_hal_eth_legacy.h"
328
#endif
/* HAL_ETH_LEGACY_MODULE_ENABLED */
329
330
#ifdef HAL_FLASH_MODULE_ENABLED
331
#include "stm32f7xx_hal_flash.h"
332
#endif
/* HAL_FLASH_MODULE_ENABLED */
333
334
#ifdef HAL_SRAM_MODULE_ENABLED
335
#include "stm32f7xx_hal_sram.h"
336
#endif
/* HAL_SRAM_MODULE_ENABLED */
337
338
#ifdef HAL_NOR_MODULE_ENABLED
339
#include "stm32f7xx_hal_nor.h"
340
#endif
/* HAL_NOR_MODULE_ENABLED */
341
342
#ifdef HAL_NAND_MODULE_ENABLED
343
#include "stm32f7xx_hal_nand.h"
344
#endif
/* HAL_NAND_MODULE_ENABLED */
345
346
#ifdef HAL_SDRAM_MODULE_ENABLED
347
#include "stm32f7xx_hal_sdram.h"
348
#endif
/* HAL_SDRAM_MODULE_ENABLED */
349
350
#ifdef HAL_HASH_MODULE_ENABLED
351
#include "stm32f7xx_hal_hash.h"
352
#endif
/* HAL_HASH_MODULE_ENABLED */
353
354
#ifdef HAL_I2C_MODULE_ENABLED
355
#include "stm32f7xx_hal_i2c.h"
356
#endif
/* HAL_I2C_MODULE_ENABLED */
357
358
#ifdef HAL_I2S_MODULE_ENABLED
359
#include "stm32f7xx_hal_i2s.h"
360
#endif
/* HAL_I2S_MODULE_ENABLED */
361
362
#ifdef HAL_IWDG_MODULE_ENABLED
363
#include "stm32f7xx_hal_iwdg.h"
364
#endif
/* HAL_IWDG_MODULE_ENABLED */
365
366
#ifdef HAL_LPTIM_MODULE_ENABLED
367
#include "stm32f7xx_hal_lptim.h"
368
#endif
/* HAL_LPTIM_MODULE_ENABLED */
369
370
#ifdef HAL_LTDC_MODULE_ENABLED
371
#include "stm32f7xx_hal_ltdc.h"
372
#endif
/* HAL_LTDC_MODULE_ENABLED */
373
374
#ifdef HAL_PWR_MODULE_ENABLED
375
#include "stm32f7xx_hal_pwr.h"
376
#endif
/* HAL_PWR_MODULE_ENABLED */
377
378
#ifdef HAL_QSPI_MODULE_ENABLED
379
#include "stm32f7xx_hal_qspi.h"
380
#endif
/* HAL_QSPI_MODULE_ENABLED */
381
382
#ifdef HAL_RNG_MODULE_ENABLED
383
#include "stm32f7xx_hal_rng.h"
384
#endif
/* HAL_RNG_MODULE_ENABLED */
385
386
#ifdef HAL_RTC_MODULE_ENABLED
387
#include "stm32f7xx_hal_rtc.h"
388
#endif
/* HAL_RTC_MODULE_ENABLED */
389
390
#ifdef HAL_SAI_MODULE_ENABLED
391
#include "stm32f7xx_hal_sai.h"
392
#endif
/* HAL_SAI_MODULE_ENABLED */
393
394
#ifdef HAL_SD_MODULE_ENABLED
395
#include "stm32f7xx_hal_sd.h"
396
#endif
/* HAL_SD_MODULE_ENABLED */
397
398
#ifdef HAL_MMC_MODULE_ENABLED
399
#include "stm32f7xx_hal_mmc.h"
400
#endif
/* HAL_MMC_MODULE_ENABLED */
401
402
#ifdef HAL_SPDIFRX_MODULE_ENABLED
403
#include "stm32f7xx_hal_spdifrx.h"
404
#endif
/* HAL_SPDIFRX_MODULE_ENABLED */
405
406
#ifdef HAL_SPI_MODULE_ENABLED
407
#include "stm32f7xx_hal_spi.h"
408
#endif
/* HAL_SPI_MODULE_ENABLED */
409
410
#ifdef HAL_TIM_MODULE_ENABLED
411
#include "stm32f7xx_hal_tim.h"
412
#endif
/* HAL_TIM_MODULE_ENABLED */
413
414
#ifdef HAL_UART_MODULE_ENABLED
415
#include "stm32f7xx_hal_uart.h"
416
#endif
/* HAL_UART_MODULE_ENABLED */
417
418
#ifdef HAL_USART_MODULE_ENABLED
419
#include "stm32f7xx_hal_usart.h"
420
#endif
/* HAL_USART_MODULE_ENABLED */
421
422
#ifdef HAL_IRDA_MODULE_ENABLED
423
#include "stm32f7xx_hal_irda.h"
424
#endif
/* HAL_IRDA_MODULE_ENABLED */
425
426
#ifdef HAL_SMARTCARD_MODULE_ENABLED
427
#include "stm32f7xx_hal_smartcard.h"
428
#endif
/* HAL_SMARTCARD_MODULE_ENABLED */
429
430
#ifdef HAL_WWDG_MODULE_ENABLED
431
#include "stm32f7xx_hal_wwdg.h"
432
#endif
/* HAL_WWDG_MODULE_ENABLED */
433
434
#ifdef HAL_PCD_MODULE_ENABLED
435
#include "stm32f7xx_hal_pcd.h"
436
#endif
/* HAL_PCD_MODULE_ENABLED */
437
438
#ifdef HAL_HCD_MODULE_ENABLED
439
#include "stm32f7xx_hal_hcd.h"
440
#endif
/* HAL_HCD_MODULE_ENABLED */
441
442
#ifdef HAL_DFSDM_MODULE_ENABLED
443
#include "stm32f7xx_hal_dfsdm.h"
444
#endif
/* HAL_DFSDM_MODULE_ENABLED */
445
446
#ifdef HAL_DSI_MODULE_ENABLED
447
#include "stm32f7xx_hal_dsi.h"
448
#endif
/* HAL_DSI_MODULE_ENABLED */
449
450
#ifdef HAL_JPEG_MODULE_ENABLED
451
#include "stm32f7xx_hal_jpeg.h"
452
#endif
/* HAL_JPEG_MODULE_ENABLED */
453
454
#ifdef HAL_MDIOS_MODULE_ENABLED
455
#include "stm32f7xx_hal_mdios.h"
456
#endif
/* HAL_MDIOS_MODULE_ENABLED */
457
458
#ifdef HAL_SMBUS_MODULE_ENABLED
459
#include "stm32f7xx_hal_smbus.h"
460
#endif
/* HAL_SMBUS_MODULE_ENABLED */
461
462
/* Exported macro ------------------------------------------------------------*/
463
#ifdef USE_FULL_ASSERT
464
/**
465
* @brief The assert_param macro is used for function's parameters check.
466
* @param expr: If expr is false, it calls assert_failed function
467
* which reports the name of the source file and the source
468
* line number of the call that failed.
469
* If expr is true, it returns no value.
470
* @retval None
471
*/
472
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
473
/* Exported functions ------------------------------------------------------- */
474
void
assert_failed(uint8_t* file, uint32_t line);
475
#else
476
#define assert_param(expr) ((void)0U)
477
#endif
/* USE_FULL_ASSERT */
478
479
#ifdef __cplusplus
480
}
481
#endif
482
483
#endif
/* __STM32F7xx_HAL_CONF_H */
484
Generated on Sat Jan 18 2025 22:23:55 for GM6000 Digital Heater Controller by
1.9.8
1.9.8